It is advisable to configure the Yealink T46G IP Phone always using the self-provisioning function because it is faster and absolutely error-free. The configuration of the Yealink T46G is done via the web, by connecting with a browser to the phone’s IP address. Obtain the IP directly from the phone by pressing the Menu softkey […]
Read More
The configuration of the terminals certified by VOIspeed should always be carried out with the Autoprovisioning function. Configuration of Yealink T2X Series IP Phones Yealink T2eP IP phones with default settings automatically search for a DHCP server on the network during boot to obtain a valid IP address. PHONE CONFIGURATION Configuration is done via the […]
Read More
The configuration of the terminals certified by VOIspeed should always be carried out with the Autoprovisioning function Yealink T52P IP DECT Phone Configuration The Yealink W52P IP DECT phone with default settings automatically searches for a DHCP server on the network during boot to obtain a valid IP address. For the use of the terminal […]
Read More
It is advisable to configure the Yealink T46G IP Phone always using the self-provisioning function because it is faster and absolutely error-free. Yealink T46G IP Phone Configuration The Yealink T46G IP phone with default settings automatically searches for a DHCP server on the network during boot to obtain a valid IP address. For the use […]
Read More
If after following the provisioning procedure the phone does not configure itself remaining in the factory configurations (the display shows “No Service” and the time is probably incorrect), check that the provisioning via DHCP option is OFF.
Read More
The phenomenon that occurs to the user is typically the following: the mute user presses the button and does not notice it calls are rejected at the first rejected call the menu on the LCD display changes to show missed calls. the user calls and complains because he no longer receives calls. When asked: << […]
Read More
RESTART THE PHONE Press button X for at least 10 seconds and wait for the restart confirmation message to appear: press OK to accept, X to reject. RESET TO FACTORY SETTINGS Press the OK button for at least 10 seconds and wait for the reset confirmation message to appear: press OK to accept, X to […]
Read More
Yealink IP Phones support a recovery mode that uses the TFTP protocol. When a phone does not regularly access the network, no longer presents the configuration pages via the web or has accidentally turned off during an FW update, the following procedure may be useful. Firmware recovery procedure Set up a TFTP server with the […]
Read More
Yealink T19P IP Phone Configuration The Yealink T19P IP phone with default settings automatically searches for a DHCP server on the network during boot to get a valid IP address. For the use of phones with the VOIspeed Server, the Firmware version 31.72.0.1 is recommended. PHONE CONFIGURATION Configuration is done via the web, by connecting […]
Read More
1. When a call is in progress, press the button located under the label “Waiting” on the display; 2. 2. Press the button under the “Resume” label on the display to resume the call . 3. If you leave a call on hold for an extended period of time, audible and visual alerts may go […]
Read More
