Configure the SIP Speaker for 2N Paging
The 2N SIP Speaker device is an IP device that connects to loudspeakers or analogue amplified systems and integrates them into a VOIspeed telephone system. It can therefore be useful to have the “Paging” function, ie a voice announcement made by a switchboard terminal that can be heard wherever there is a loudspeaker connected to the amplification system interfaced with the device itself.
The device has as default settings the DHCP client service disabled and the static IP address set to 192.168.1.100; by entering this IP in the address bar of a browser, you enter the configuration interface.
The default login credentials are:
In the Advanced Settings – Network section, you can change the device’s network settings.
ATTENTION! By modifying these parameters it may be necessary to review the IP address to connect to to access the WEB Management of the device
In the Advanced Settings à SIP Settings section, you can set the parameters for operating the device with the VOIspeed PBX. In particular, the following must be configured:
User ID: set the value equal to the username of the VOIspeed user that you want to use to connect the device (it must match the extension number).
Domain: Enter the domain specified for the VOIspeed PBX
Use auth ID: set to “Yes”
Auth ID: set the value equal to the username of the VOIspeed user that you want to use to connect the device (it must match the extension number).
Password: set the value equal to the password of the VOIspeed user you want to use to connect the device
SIP PROXY SETTINGS
Proxy address: enter the IP address of the VOIspeed server
Proxy port: default 5060
Enable registration: set to “Yes”
All other parameters of the page can be left at the default value. Press on the disk to save the settings.