The C7 series Mediatrix devices are SIP adapters to FXS interfaces for the integration of 4 or 8 analog telephones, depending on the model, with the VOIspeed switchboard. The following guide is valid for both the 4-door model and the FXS 8-door model. PREMISE The devices are configurable through a web browser; they are equipped […]
Read More
The echo is commonly created on PSTN lines when analog lines are involved in the conversation. To minimize this sometimes very annoying phenomenon, Patton SmartNode gateways have an integrated echo canceller. Since they work in an adaptive way, only the really existing echo is canceled. The best place to cancel an echo is at the […]
Read More
If it is not possible to access the web administration of a Mediatrix gateway, there are three methods to reset or restart it, using the reset button by means of a thin clip. By pressing and holding the reset button, the Power LED will start flashing: Simple restart: by releasing the button within the first […]
Read More
The 2N SIP Speaker device is an IP device that connects to loudspeakers or analogue amplified systems and integrates them into a VOIspeed telephone system. It can therefore be useful to have the “Paging” function, ie a voice announcement made by a switchboard terminal that can be heard wherever there is a loudspeaker connected to […]
Read More
Configuring the Soundstation IP 5000 hands-free station Configuration is done via the web, by connecting with a browser to the phone’s IP address. You can get the IP of the Sounstation from the monitoring of the DHCP server Once connected via the web, the default administrator password is 456. Below we indicate some parameters to […]
Read More
By default, the AT800DP adapter does not allow you to configure a username other than the telephone extension via the web: in fact, only the UserID field appears). However, this configuration can be done via the configuration file. The device must first be fully configured as indicated in the configuration manual, including the SIP account […]
Read More
If the display cannot be accessed due to a fault or a factory reset is required without accessing the device web page: – Turn off the adapter – Simultaneously press the # (hash) and * (asterisk) keys – Power the adapter This operation could in some cases also bring the apparatus back to life.
Read More
The AT800DP / CT11 device is a SIP adapter for headphones, with LCD display, POE compatible. It also supports the standard 12V, 500mA power supply (the power supply is not provided), in cases where you do not have a POE switch. It is suitable for those workstations where the operator must have his hands free […]
Read More
If you happen to need to update Polycom phones that can’t surf the net and you can’t set up an auto-provisioning server that requires you to activate option 66 in the DHCP server, you can have the firmware downloaded from a local server via the web just like you would do if phones surfed. Just […]
Read More
According to European regulations, the volume levels of the various devices connected to the IP phone (handset, headphones, and hands-free) are reset to the standard values (low) after each phone call, to avoid damage or annoyance in those with more sensitive hearing who want to use. the phone. To permanently save the customized volume adjustments […]
Read More
