It is advisable to configure the Yealink T19P IP Phone always using the self-provisioning function because it is faster and absolutely error-free. Configuration is done via the web, by connecting with a browser to the phone’s IP address. Obtain the IP directly from the phone by pressing the Menu softkey (bottom right below the display) […]
Read More
The Cisco SPA 112 is a SIP adapter for analog phones with 2 FXS ports. It therefore allows you to integrate up to two traditional analog devices (BCA and FAX) as extensions of the VOIspeed switchboard and thus take advantage of all the advanced functions of the PBX. Attention: the supported firmware version is 1.3.5 […]
Read More
The use of FXS adapters for sending and receiving FAXes may have a higher failure rate than a traditional line, but in cases where you cannot connect your fax machine directly to a telephone line, it is possible configure the Cisco SPA112 adapter to connect a FAX machine. Attention: the main requirement for using FAX […]
Read More
BEFORE PROCEEDING! If the LAN network is configured in the 192.168.1.XX subnet, it is necessary to proceed with the configuration via a PC connected DIRECTLY to the adapter’s PC port (just use a straight network cable). Otherwise go directly to point 4) Make sure the PC has an address in the 192.168.1.XX subnet other than […]
Read More
The 2N Helios IP Vario device is an IP video door entry unit which, configured in connection with a VOIspeed switchboard, allows the use of an audio / video door entry station with the possibility of door or gate opener (see technical specifications) and to reproduce images on videophones connected to the VOIspeed switchboard or […]
Read More
In this article we will see how to configure a company directory on IP-DECT Spectralink 400 and 6500 servers and how it can then be consulted from connected DECT phones. The guide below can be used on Spectralink IP-DECT Server with firmware version equal to or higher than PCS13_. NOTE: Only 74xx-75xx-76xx series phones can […]
Read More
Spectralink Server IP-DECT KWS 400 The Spectralink DECT 400 Server, also known as Kirk Wireless Server 400, is the DECT-IP solution dedicated to covering small and medium-sized environments. In the standard configuration it supports a maximum of 12 registered terminals and 6 simultaneous calls, while with an additional license it is possible to increase its […]
Read More
The VOIspeed DECT 6500 is the complete solution designed for full mobility in the company and for coverage from small to large radius. The system consists of at least one KWS6500 Server, at least one base station and at least one VOIspeed DECT telephone. With the minimum solution (1 Server 6500 and a […]
Read More
Gigaset A510 IP DECT Telephone On this page you can download the configuration manual for VOIspeed 6
Read More
The IPEI code is a unique 12-digit code that identifies a DECT terminal, in the same way as the IMEI code used for mobile phones. This code is required by the DECT base to accept the telephone subscription and must be set in the base user profile. Telephones usually store the code in hexadecimal format, […]
Read More
